+49 4321 8974

 +49 4321 82494 

 pflueger@pfluegerhp.de    24/7

opening hours:

Monday - Friday 8 am - 6 pm


Chemical Protection Suits / Full Protection Suits 

 

Chemical Protection Suit

Chemprotector Divetex®

EN 943-1:2015, Type 1b-ET

SOLAS Approval

Protective suit against dangerous solid, liquid and gaseous chemicals, Including liquid and solid aerosols.

As required by SOLAS 1974 as amended, Ch. II-2 Reg.19.3.6.1 and IMO IBC Code, Ch.14.1.  

IGC code  2016 Ch. 14

(reusable)

for more details click the image

Chemical Protection Suit

Chemprotector  Mega Divetex®

EN 943-2-1, Type 1b-ET

Protective suit against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols.

(permanently antistatic)

As required by SOLAS 1974 as amended, Ch. II-2 Reg.19.3.6.1 and IMO IBC Code, Ch.14.1.  

IGC code  2016 Ch. 14

(reusable)

for more details click the image

 

Chemical Protection Suit

Chemprotector Divetex®

EN 943-2-1, Type 1b-ET

with internal ventilation

Chemical protection suit against hazardous solid, liquid and gaseous chemicals, including liquid aerosols and solid particles. 

The suit is equipped with internal ventilation incl. outlet valves, waist belt with regulating valve and noise reducer!

As required by SOLAS 1974 as amended, Ch. II-2 Reg.19.3.6.1 and IMO IBC Code, Ch.14.1.  

IGC code  2016 Ch. 14

 (reusable)

Vitex Full Protection Suit

EN 943-2:2019 Type 1a ET

SOLAS Approval

Full protective suit with extreme chemical resistance. The applied sealing technique ensures absolute gas tightness. Material: permanently antistatic. Balancing valves and a large visor complete the technical equipment. Optional with internal ventilation.

As required by SOLAS 1974 as amended, Ch. II-2 Reg.19.3.6.1 and IMO IBC Code, Ch.14.1.

​​​​​​​IGC code 2016 Ch. 14

 (reusable)

for more details click the image

Full Protection Suit EN 943-2:2019 Typ 1c 

Full protective suit with very high chemical resistance. Flame retardant and permanently antistatic material,

Ventilation via separate compressed air line. Connection at the head part. Compensating valves, waist belt, control valve, noise reducer and a large visor complete the technical equipment.

(reusable)

for more details click the image

send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>

Hazmat goods training > all CSA available as training- / practice suits! 

Heat Protection Suits

 

Heat Protection Suit Seaprotector I

ISO 15538:2001 Level II   -  MED Approval (Module B+D)

The heat protection suit Seaprotector I is specially designed for fire fighting on seagoing vessels. It complies with the MED Directive 2014/90/EU

> MED Item No. MED/3.3c

with the standard ISO 15538 Level II

Scope of delivery: jacket & trouser (incl. suspenders). 

Optionally available:

Fireman helmet as per EN443:2008 MED Approval

incl. neck protection

Fireman gloves as per EN 659 MED Approval

Fire Fighter Balaclava as per EN 13911

Fireman boots as per EN 15090:2012 MED Approval

for more details click the image

 

 

 

Heat Protection Suit Seaprotector II

ISO 15538:2001 Level II  -  MED Approval (Module B+D)

The heat protection suit Seaprotector II is specially designed for fire fighting on seagoing vessels. It complies with the

MED Directive 2014/90/EU  > MED Item No. MED/3.3c

with the standard ISO 15538 Level II

Scope of delivery: jacket & trouser (incl. suspenders). 

Optionally available:

Fireman helmet as per EN443:2008 MED Approval

incl. neck protection

Fireman gloves as per EN 659 MED Approval

Fire Fighter Balaclava as per EN 13911

Fireman boots as per EN 15090:2012 MED Approval

for more details click the image

 

 

 

Fire Fighting Suit Seaprotector III

EN 469:2020  Level II -  MED Approval (Module B+D)

The heat protection suit Seaprotector III consists of 4 different layers for optimal protection. The suit is specially designed for fire fighting on seagoing vessels.

It complies with the MED Directive 2014/90/EU > MED Item No. MED/3.3a

with the standard EN 469:2020

Scope of delivery: jacket & trouser (incl. suspenders). 

Optionally available:

Fireman helmet as per EN443:2008 MED Approval

incl. neck protection

Fireman gloves as per EN 659 MED Approval

Fire Fighter Balaclava as per EN 13911

Fireman boots as per EN 15090:2012 MED Approval

--------------------------------------------------------------------

Reflective Tape Tested: EN 471

Style: Jacket and trouser - different colors

Standard: EN 469:2020, performance Level II

weight: about 2,9 kg

for more details click the image

bag_rot.png
bag_black.png

  Carrying bags for protective suits, helmets

and spare parts

Fire escape-/rescue mask

The escape/rescue mask/ hood is a respiratory protective device for self rescue in accordance with EN 403:2004-08 and protects the wearer from toxic gases, vapours and particulates for at least 30,40 or 60 minutes when escaping a fire. The item consists of an air-purifying vacuum filter, which prevents the inhalation of poisonous gases and smoke. It is a fire resistant hood which also protects the eyes and head from smoke and flame.

 

 

 

Firefighting helmet SOLAS/MED Approval EN 443:2008

Flame retardant high temperature resistant copolymer plastic Long-term resistance to 140°C / 30 min, 250°C / 15 min European standards conformity (EN 443/1997) Polycarbonate anti-scratch and anti-fog coated visor Removable neck protector made of genuine leather (optional aluminized carbon-fiber) Interior shock absorber made of polyurethane foam Integrated adjustment system (ranging from 52 – 63cm) Luminescent and reflective tapes visible from both sides and in all conditions Flame retardant cotton chinstrap – tested to prevent skin irritations Ready to use with a full face mask - weight: 1165 g +/- 30g

It complies with the

MED Directive 2014/90/EU  > MED Item No. MED/3.6

(please click the image)

 

  Fireman´s boots MED Approval EN 15090:2012

Fireman’s boots , with rubber uppers, a protective toe cap,a flame retardant rubber outsole and a comfortable woven cotton canvas lining.

It complies with the

MED Directive 2014/90/EU  > MED Item No. MED/3.4

(please click the image)

send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>

Sandblasting Suits, Accessories & spare parts

 

Sand Emitter Protection Suit

,,BLASTER" ISO 14877 Typ 3

​​​​​​​Perfect protection for various blasting techniques

The sandblasting suit consists of two suits (inner and outer suit), which are made from two different, very high-quality and robust materials.

The suit also has knee and elbow reinforcements.

(reusable)

for more details click the image

Leather blasting gloves

Product features:
very flexible even at low temperatures
long durability
comply with the standards DIN EN 388,

DINprEN 407 in conjunction with
and DIN EN 420


Product description:
The blasting glove made of split leather is a very robust glove with a sewn-on cuff and elasticated band to prevent the penetration of blasting media.
Mechanical strength:
Abrasion resistance - grade 3
Cut resistance - Grade 1
Tear resistance - Grade 3
Puncture resistance - grade 3

 

Shot blasting helmet ,,Commander II"

Product features:
ensures extremely high safety when blasting.
according to EN 271
according to EN 14594:2005 class 4B
with CE mark
Weight: approx. 2 kg


Product features:
robust glass fibre polyester helmet
Very stable window box
Air flow indicator ensures safety
wire mesh attachment
Inner clear disc with rubber frame
Rebound protection for noise and wear reduction
Body protection made of durable, coated fabric
Control valve for compressed air hose connection

 

Control valve for the Commander II
Shield helmet with silencer and plug connector

 

 

Convoluted hose for Commander II with bayonet connection and cuff

 

Protective cape for Commander II sandblasting helmet made of cotton, bisonyl or leather

Wet blast suit - Avilastic

Polyester fabric with PUR coating on one side. 

Front zipper incl. aperture

Neck ruff, conical latex cuffs, leg straps, outside hot air welded, pull-through tabs for a belt

Color: orange

(reusable)

Visor frame for sandblasting helmet
Commander II

Grid protection for sandblasting helmet Commander II

Glass wear discs for  sandblasting helmet Commander II

Polyester visor plastic inner visor for sandblasting helmet Commander II

Visor seal for sandblasting helmet
Commander II

send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>

Working & Survival Suits / Immersion Suits / Cold Protection Suits


Work and Survival Suit Divetex®

(SOLAS/MED Approval) Modul B + D

The work and survival suit Divetex®-S is made of the extremely chemical-resistant Divetex®. For work on oil platforms, offshore, coast guard, etc..

(reusable)

for more details click the image

Immersion suit SOLAS/MED

highly visible color, Material: Neoprene, water proofed zipper, 5mm 3-fingered neoprene gloves for easy adjust and grasp object. SOLAS/MED approved reflective tape. Main applications: Cargo vessels; Fishing vessels; Navy; Offshore personnel; Passenger ships.
(reusable) for more details click the image

Dry suit / Offshore suit

Breathable material AIRTEX, Reflective tape on arms, backside and legs, Waterproof zipper, laminated neoprene hood, laminated neoprene cuffs, latex boots, 2 pockets, weight about 1,3 kg
(reusable) 

Cold Protection Suit

Protective suit for very low temperatures.
Application range down to -160 degrees.
Protection against splashes of liquid nitrogen
Product consists of:
- Hood / - Coverall  
- gloves / - protective boots
various sizes
(reusable) 

send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>

Sleeve Aprons / Overalls

 

Protective Sleeve Apron Divetex®

EN 14605:2005 + A1:2009,  EN 1149-5:2018, EN ISO 14116

The Divetex® sleeve apron protects the chest, hip, arm and leg areas against all types of chemical fluids. It is adjustable on the back for a perfect fit on the body.

(reusable) for more details click the image

Protection Overall Divetex®

EN 14605:2005, EN 1149 -5:2018, EN ISO 14116

The Divetex® chemical protective coveralls have crashed hoods and can be worn over a protective helmet and / or respirator. The material is permanently antistatic on both sides. (reusable) for more details click the image


Protective Jacket & Trouser Divetex®

EN 14605:2005, EN 1149 -1,-2

Protective suit consisting of jacket with hood and pants incl. suspenders against liquid chemicals and aerosols The material is permanently antistatic on both sides and has a very high wearing comfort.
(reusable) for more details click the image

send inquiry >>>
send inquiry >>>
send inquiry >>>

Breathing hoods / Laboratory hoods

 

Chemical protection hood Mega Divetex®

green

Breathing/respirator hood protects the head and shoulders. The material is permanently antistatic and flame retardant. Furthermore, the material is extremely chemical resistant. Incl. large polycarbonate visor and 2 outlet valves.

(reusable) 

Chemical protection hood Divetex®

blue

Breathing/respirator hood protects the head and shoulders. The material is permanently antistatic and flame retardant. Furthermore, the material is extremely chemical resistant. Incl. large polycarbonate visor and 2 outlet valves

(resuable) 

Chemical protection hood Divetex®

red

Breathing/respirator hood protects the head and shoulders. The material is antistatic and flame retardant. Furthermore, the material is chemical resistant. Incl. large polycarbonate visor and 2 outlet valves

(reusable) 

Tornado helmet protection hood Divetex®

blue or green

Breathing/respirator hood with integrated helmet. 

Ventilation via air hose incl. control valve, noise reducer and waist belt.. The material is permanently antistatic

(EN 1149-5), flame retardant (EN 14116) and chemical resistant. Incl. large polycarbonate window and 2 outlet valves (reusable).

 

Laboratory hood transparent

the transparent laboratory hood offers high wearing comfort and effective protection. (reusable)

(please click the image)

send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>

Weather protective clothing

Avilastic® - Working and weather
Protective suit (two-piece) EN 343

Jacket with hood and trousers
Fields of application: Aviation industry, water and shipping, agriculture and forestry, 
fisheries, automotive industry

(reusable) 

Avilastic® Protection Overall EN 343

One-piece protective coverall with two-way zip with flap and Velcro completely sealed. Sewn-on hood, drawstring in hood for lacing up, Velcro fastening on arms and legs, available with or without breast pocket. Also available in plush version.

(reusable) 

Avilastic® Rain Coat EN 343

Coat with firmly sewn-on, 3-piece hood with drawstring, 2 side pockets with Velcro fastening, sleeve inner cuffs.
Fields of application: Police, aviation, water and shipping, agriculture and forestry.

(reusable) 

Avilastic® Parka EN 343

Jacket with fixed hood, kidney protection, 2 side pockets, drawcord at hood and waist. Inner lining can be removed with zip, sleeves with wind flap and Velcro fastener, side pockets with plush inner lining, also available with double inner lining for extreme cold,
Fields of application: Aircraft industry / aviation, water and shipping, agriculture and forestry, cold storage companies, media companies (reporters).

(reusable) 

send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>

Helmets (marine, fire brigades, industrial)


Marine firefighting helmets SOLAS/MED Approval

we offer a full range of firefighting helmets

(for more information please click the image) 

 

 

 

 

 

 

 

 

Firefighting helmets

we offer a full range of firefighting helmets

(for more information please click the image) 

 

 

 

 

 

 

 

 

Industrial helmets

we offer a full range of helmets

(for more information please click the image) 

 

 

 

 

 

 

 

 

send inquiry >>>
send inquiry >>>
send inquiry >>>

Welding helmets

 

Welding helmet

JAS-Weldmaster® ECO 

 Design: manual variable

 - Standard: DIN 4/9-13

 - Field of view: 42 x 96 mm

 - welding types: TIG/MIG/MAG/

Electrode welding

 - Color: black

 - Brand: JAS

 - Weight: 880 g

Welding helmet

optrel e684 

Design: stepless protection level range

 - Standard: DIN 5-13

 - field of vision: 90 x 110 mm

 - Welding types: arc welding/cutting method

 - Color: silver lacquered

 - Brand: OPTREL

Welding helmet

optrel e650

Design: Protection level setting

 - Standard: DIN 4/9-13

 - Field of view: 50 x 100 mm

 - Welding types: electrode/MIG/MAG/WIG/

    Plasma welding

 - Color: black

 - Brand: OPTREL

  - Weight: 779 g

Welding helmet

neo p550

Design: without side parts

 - Standard: EN 379 DIN 4/9-13

 - field of view: 90 x 110 mm

 - Welding types: f. all electric welding methods

 - Color: black unpainted

 - Brand: OPTREL

 - Weight: 810 g

Welding helmet

panoramaxx

Finish: black

 - Standard: DIN 5-12

 - Model: panoramaxx

 - field of view: 180 x 120 mm

 - Welding types: f. all electric welding methods

 - Brand: OPTREL

 - Weight: 1.390 g

Welding helmet

Vegaview 2.5

Version: Battery life

 approx. 3000 h

 - Standard: DIN 8-12

 - Field of view: 90 x 110 mm

 - Color: black

 - Brand: OPTREL

 - Weight: 940 g

send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>

Face shield

 

optrel grinding helmet Clearmaxx EN 166 EN 175

EN166, EN175 BT

due to the low weight of approx. 330 g and the ergonomic fit, the standard Clearmaxx version offers good wearing comfort Applications:

Grinding applications

Metalworking

Electroplating operations

Woodworking

Waste disposal sites

Agriculture

Finish: PC clear

- Standard: EN 166 EN 175 BT  

- Weight: 650 g

 

 

face shield

Bionic

specially designed for heavy work

robust but at the same time extremely light and balanced for all-day wearing comfort

with 4D head support for maximum wearing comfort and best ergonomics

comfortable fit even with protective goggles or respiratory protection

automatic locking of the head width adjustment for a tight and secure fit

design: with head support

 - Standard: EN 166

 - Content: 2-piece,

   holder with lens

 - Color:

 - Brand: HONEYWELL

 - Material lens 

   Polycarbonate

 - Weight: 640 g

Protective screen clear gold vaporized PC EN 166 EN 167 EN 168 EN 171 - GFKVI001-2

made of PC, gold vaporized

made of 1 mm thick polycarbonate

excellent optical quality

high temperature resistance approx. -50 °C to +135 °C

good UV protection

high notched impact strength

94 % of radiant heat is reflected by the gold layer

protection level 4-4

Applications: steel industry, foundries

Finish: clear, gold vaporized

Standard: EN 166, EN 167, EN 168, EN 171

PPE category: II

Size: 500 x 250 x 1 mm

Material: polycarbonate

Weight: 135 g

Protective screen clear PC, EN 166 EN 167 EN 168 - GFKVI002

made of 1.15 mm thick cellulose acetate

excellent optical quality

temperature resistance up to approx. +90 °C

good chemical resistance

high notched impact strength

applications: heavy industry: esp. chemical plants - grinding work - splinter protection

Finish: clear

Standard: EN 166, EN 167,

EN 168

PPE category: II

size: 500 x 250 x 1 mm

Material: polycarbonate

Weight: 135 g

Protective screen clear

PC - GFKVI102

made of 1 mm thick polycarbonate

for mounting on KGS helmet holder

excellent optical quality

high temperature resistance from approx. -50 °C to +135 °C

good UV protection

high notched impact strength

Applications: heavy industry: especially steel industry, foundries, chemical plants, splash and shatter protection

Finish: clear

PPE category: II

Size: 480 x 200 x 1 mm

Material: Polycarbonate

made of 1 mm thick polycarbonate

for attachment to KGS helmet mount, excellent optical quality high temperature resistance from approx. -50 °C to +135 °C

good UV protection

high notched impact strength

 

Electrician's shield

Protective screen for electricians to protect against faulty circuits and class 1 arcing faults.

(4 kA)

made of 1,5 mm thick polycarbonate

tested according to DIN 166 + DIN GS-ET-29 completely made of plastic

fits on many helmets

Standard: EN 166, EN 168, EN 169, EN 170

PSA category: III

size: 460 x 200 x 1,5 mm

Material: polycarbonate

Weight: 245 g

send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>

more items

 

Lifejacket MED Approval

 

material: Polyester, buoyancy material: EPE foam,

Equipped with whistle,

buddy line and lifting becket.

main applications: cargo vessels,

navy, offshore,

passenger vessels


Small fireman´s axe with insulated handle

DIN: 14924

length: 33 cm

weight: 1kg

insulated handle

other version upon request!





Daniamant W4 

Lifejacket light - SOLAS

the Daniamant W4 activates automatically when immersed in water and will remain lit once water activated to allow for rescue scenarios. The light can be turned off manually if required by pressing the switch.The Daniamant lifejacket light are maintenance free, but some checks should be made annually. It has a storage life of 5 years after manufacturing date.

Safety boots

for highest requirements

we offer a wide range of safety boots.

(for more information please click the image)

 

 

 

 

Safety gloves

(chemical resistant, cold resistant)

we offer a wide range of protective gloves for industrial applications

(for more information please click the image)

 

 

 

 

Wader Divetex

with sewed and welded boots
(EN 20345) (steel toe cap and steel sole).Knee pads, adjustable suspenders, waist elastic, seams welded waterproof and chemicalproof. Features: high wearing comfort, elastic and cold resistant to -40 degrees. washable (reusable)


send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>
send inquiry >>>

DEVELOPMENT AND MANUFACTURE OF HIGH-QUALITY PROTECTIVE CLOTHING

This website uses cookies to ensure you get the best experience on our website. Imprint & Data Protection